Improving Jaguar tone

Several modifications are required to both the LEAD and RYTHYM circuits, as follows:

NOTES FOLLOW SEYMOUR DUNCAN SCHEMATIC PAGE

BOTH CIRCUITS:

Add a Treble Bleed modification to the volume pot (Simple 100K resistor and a 0.002 mfd capacitor soldered arcoss the hot inlets and hot outlets of each circuit volume pot - add this resistor/capacitor combination between the yellow and gray wires.)

RYTHYM CIRCUIT ONLY:

Add a 200K resistor on 50K linear tone circuit (Simple - add this resistor between the green and gray wires.) This increases your resistance and brings the tone to a better rythym range then was possible with the standard setup.